Skip to content

Garmin Montana 650 Visor

This handy little visor designed by iClint will help you to be able to see your screen when on your Garmin Montana 650.

Simply print and screw together.

2 Clamps and 1 Visor Frame

1. Remove brim (it should just snap off)

2. Clean up edges if necessary with a craft knife

 3. Run a 4.5mm drill bit through the holes on in the clamp parts to remove the thin infill in the holes. 

4. Assemble the Visor around your GPS using:

  • 4x M4x30mm Socket head Cap screws
  • 4x M4 Nylock Nuts

5. Align the visor to the screen and then tighten the screws to clap the visor around the GPS.