Artillery Carbon PLA 1.75mm 1kg

Artillery is a premium brand of filament, this filament is their Carbon Fibre filament for that extra bit of strength.

This filament is ideal for higher strength prints that need the structural strength yet won't be seeing higher temperatures.

This filament is Carbon Fibres encased in PLA, meaning print it at PLA temperatures with relatively same settings, except turn your retraction down/off. 

You need a hardened nozzle for this filament.

It works best on a Direct Drive Printer.

For more info, our blogs are here to help you.

Check out our Tech Spec below

Material: Carbon Encased in PLA

Printing Temperature Range: 200°C-215°C.
Note you can choose to print without a heated bed if you wanted.
Flexible beds make the best beds if it sticks too well.

Retraction Settings: Low/Off

Recommended Nozzle Width: 0.6mm-0.8mm best, possible with 0.4mm.

Width: 1.75mm

Suitable Printers: All printers with Hardened or Ruby Nozzle. Best suited to direct drive printers. Suitable on all QidiTech printers sold on The3dStore.

Weight: 1kg per Spool

Tolerance: ±0.02mm

Colour: Black

Speed: Best to print at around 50% of your standard PLA speed, with 30% hitting the sweet spot on most printers.
If you're using our Qidi Printers, use the default slicer settings, they're well tuned.